Integrity Joint: Difference between revisions
From Squirrel's Lair
Ttenbergen (talk | contribs) |
Ttenbergen (talk | contribs) No edit summary |
||
| Line 8: | Line 8: | ||
* export as .eps (for consistency) | * export as .eps (for consistency) | ||
* imported to [[PartWorks 3.0]] | * imported to [[PartWorks 3.0]] | ||
* cut on [[ShopBot]] | * cut on [[3-axis ShopBot]] | ||
=== Problems === | === Problems === | ||
Revision as of 14:30, 2013 October 2
A mix between a tenon joint and a statement.
a word is both the through-tenon and the mortise for a joint.
Progress
- word graphic designed such that the inner and outer radius should be big enough for router bit
- Font for inside and outside CNCing in inkscape
- export as .eps (for consistency)
- imported to PartWorks 3.0
- cut on 3-axis ShopBot
Problems
fit is too tight
- last T stem width is tenon: 2.9mm; mortise: 2.75mm; diff: 0.15mm (inkscape says 2.813)
- root of y with is tenon: 3.7mm; mortise: 3.4mm; diff: 0.3mm (inkscape says 3.413)
- height of first i is tenon: 14.8mm; mortise: 14.9mm; diff: 0.1mm
- height of t is tenon: 14.75mm; mortise: 14.6mm; diff: 0.15mm
- 'avg diff: 0.175mm
- is the bit 1.4125 instead of the 1.5875mm it should be?
- test cut single line with 1/16 bit and measure what it really isTemplate:TD Possum Lodge
- re-test cut the lettering with bit size set to 1.4125mm
File Location
stick\projects\Integrity Joint
