Page values for "Font for inside and outside CNCing"
"_pageData" values
1 row is stored for this page| Field | Field type | Value |
|---|---|---|
| _creationDate | Datetime | 2012-12-13 7:34:33 PM |
| _modificationDate | Datetime | 2022-11-04 4:21:07 AM |
| _categories | List of String, delimiter: | | Project |
| _pageID | Integer | 126 |
| _pageName | Page | Font for inside and outside CNCing |
| _pageTitle | String | Font for inside and outside CNCing |
| _pageNamespace | Integer | 0 |
"Project" values
1 row is stored for this page| Field | Field type | Value |
|---|---|---|
| shortDescription | Wikitext string | Font with minimum size for routing with a rotary bit. |
| longDescription | Wikitext | I needed a font for projects like Integrity Joint that would allow routing both the letters and the surroundings in the smallest size possible for a given cutter. The limit is that the cutter has to fit both the insides (black part) of the letters, but also the outsides and islands of the letters. I could not find a font that is optimized for this, so I created a set of vector letters. You can download them at Media:CNC_alphabet.svg and use them, but please link back here if applicable. |
| geekery | Wikitext | The size of the letters is limited by having to fit the bit into each line and each island. So, a letter like "B" is the worst case scenario: it has three horizontal lines and two islands, so must be at least 5x the bit size and a tiny bit more. I started by creating the worst case letters and then added the others to look similar. |
| mainImage | File |  |
| skillSet | List of Page, delimiter: ; | Graphic Design |
| projectType | List of Page, delimiter: ; | Personal Project |
| northForge | Boolean | Yes |
| randomChangeForce | Boolean |
