Integrity Joint

A mix between a tenon joint and a statement.

a word is both the through-tenon and the mortise for a joint.

Progress

• word graphic designed such that the inner and outer radius should be big enough for router bit
• Font for inside and outside CNCing in inkscape
• export as .eps (for consistency)
• imported to PartWorks 3.0
• cut on 3-axis ShopBot

Problems

fit is too tight

• last T stem width is tenon: 2.9mm; mortise: 2.75mm; diff: 0.15mm (inkscape says 2.813)
• root of y with is tenon: 3.7mm; mortise: 3.4mm; diff: 0.3mm (inkscape says 3.413)
• height of first i is tenon: 14.8mm; mortise: 14.9mm; diff: 0.1mm
• height of t is tenon: 14.75mm; mortise: 14.6mm; diff: 0.15mm
• 'avg diff: 0.175mm
• is the bit 1.4125 instead of the 1.5875mm it should be?

• re-test cut the lettering with bit size set to 1.4125mm

File Location

stick\projects\Integrity Joint