Laser Cutting: Difference between revisions

Revision as of 20:47, 2021 October 5

We have access to several Laser Cutters at North Forge Fabrication Lab. These can cut many materials including acrylic, wood/veneer, paper, cardboard, some rubbers and other plastics. They can also engrave metal.

Other Laser Cutting related pages on this wiki:

		Actioned 2021-10-31

this needs to shift to an internal page

75 watt epilog laser cutter

workable materials

Laserable materials: http://www.epiloglaser.com/laserable_materials.htm
- for plastics:
  - thermoplastic delrin http://www.johnstonplastics.com/mech_delrin.htm
  - film mylar http://www.johnstonplastics.com/glaz_polyester.htm
  - thermoplastic acrylic http://www.johnstonplastics.com/glaz_acrylic.htm

Material size

18" by 24" (aka 45.72cm x 60.96cm)

eliminate the "fog" around things

Alexander's calgary flames had a fog around them - why? when looking how to print from Inkscape I found some info about this... some people called it a "halo"; didn't find out what the solution is.

Materials/Speed/Power settings

see Laser_cutting_test_settings for tool to facilitate

see stick\Tools\Laser\Laser cutter settings for tested settings

Tweak and put into files instead

Template:TD Possum Lodge retest and save in settings if best

Styrene "use low frequency like 30 but high speed"
- 10sp 30pw 40fr worked; could prob go faster

URLs

@@ Line 1: / Line 1: @@
+We have access to several Laser Cutters at [[North Forge Fabrication Lab]]. These can cut many materials including acrylic, wood/veneer, paper, cardboard, some rubbers and other plastics. They can also engrave metal.
+Other Laser Cutting related pages on this wiki:
+{{CategoryList|Laser Cutting}}
+[[Category:Laser Cutting| *]]
+[[Category:Skillset]]
+{{TD computer|}} this needs to shift to an internal page
 watt epilog laser cutter