Clip-in foot stretchers: Difference between revisions

Revision as of 11:42, 2012 December 30

like the ones I have only better, more production

file generated in Alibre
size:
- 15mm thick (0.590551" --> .75")
- 46mm wide (1.81102" --> 2")
- 44.45mm long (aka 1.75")
purchased aluminum

[2] 
ALUMINUM FLAT BAR 6061T6
(ALUMINUM 6061T6 FLAT BAR 0.750 X  2.000)
Sku: AF6061/342

drilled the holes on the Tormach; need to set up the recess for the pedal piece, play with sprutcam to generate the g-code Template:TD Possum Lodge

mount actual pedals to a set-up, allowing anyone to use same as on bike
- problem is accommodating the sideways torque
standard thread for pedals is 9/16 20TPI, left and right; Park Tools sells taps
- think other tool and materials suppliers
mount an axle to skewer actual pedals
- chances are tehre is no standard size for the axle - disassemble the pedals I have and check.
- how would this best be mounted?

@@ Line 9: / Line 9: @@
 ** 46mm wide (1.81102" --> 2")
 ** 44.45mm long (aka 1.75")
-* get aluminum to make it [http://www.metalsupermarkets.com/Material.aspx?ProductId=AF6061/342] {{TD Buy Tool}}
+* purchased aluminum
+ [http://www.metalsupermarkets.com/Material.aspx?ProductId=AF6061/342]
   ALUMINUM FLAT BAR 6061T6
   (ALUMINUM 6061T6 FLAT BAR 0.750 X  2.000)
   Sku: AF6061/342
+* drilled the holes on the Tormach; need to set up the recess for the pedal piece, play with sprutcam to generate the g-code {{TD Possum Lodge}}
 == alternative ==