Font for inside and outside CNCing: Difference between revisions
Ttenbergen (talk | contribs) No edit summary |
Ttenbergen (talk | contribs) No edit summary |
||
| Line 1: | Line 1: | ||
{{Project | {{Project | ||
|shortDescription=Font with minimum size for routing with a rotary bit. | |shortDescription=Font with minimum size for routing with a rotary bit. | ||
|longDescription=I needed a font for projects like [[Integrity Joint]] that would allow routing both the letters and the surroundings in the smallest size possible for a given cutter. | |longDescription=I needed a font for projects like [[Integrity Joint]] that would allow routing both the letters and the surroundings in the smallest size possible for a given cutter. The limit is that the cutter has to fit both the insides (black part) of the letters, but also the outsides and islands of the letters. I could not find a font that is optimized for this, so I created a set of vector letters. You can download them at [[Media:CNC_alphabet.svg]] and use them, but please link back here if applicable. | ||
|geekery=The size of the letters is limited by having to fit the bit into each line and each island. So, a letter like "B" is the worst case scenario: it has three horizontal lines and two islands, so must be at least 5x the bit size and a tiny bit more. I started by creating the worst case letters and then added the others to look similar. | |||
|skillSet=Graphic Design | |skillSet=Graphic Design | ||
|projectType=Personal Project | |projectType=Personal Project | ||
|northForge=Yes | |northForge=Yes | ||
}} | }} | ||
Latest revision as of 20:21, 2022 November 3
| Projects | |
| |
| Project: | Font for inside and outside CNCing (I) |
| Description: | Font with minimum size for routing with a rotary bit. |
| Skillset(s) : | |
| Project Type(s) : | |
| |
I needed a font for projects like Integrity Joint that would allow routing both the letters and the surroundings in the smallest size possible for a given cutter. The limit is that the cutter has to fit both the insides (black part) of the letters, but also the outsides and islands of the letters. I could not find a font that is optimized for this, so I created a set of vector letters. You can download them at Media:CNC_alphabet.svg and use them, but please link back here if applicable.
How we did it
The size of the letters is limited by having to fit the bit into each line and each island. So, a letter like "B" is the worst case scenario: it has three horizontal lines and two islands, so must be at least 5x the bit size and a tiny bit more. I started by creating the worst case letters and then added the others to look similar.