Integrity Joint: Difference between revisions
Ttenbergen (talk | contribs) No edit summary |
Ttenbergen (talk | contribs) No edit summary |
||
| Line 2: | Line 2: | ||
|shortDescription=Through tenons for a joint that spell out words | |shortDescription=Through tenons for a joint that spell out words | ||
|longDescription=I thought it would be interesting to have through tenons for a joint that spell out words. To CNC these parts, I needed to optimize the shapes that a router bit would be able to cut for the tenons and the mortises, so I created a [[Font for inside and outside CNCing]]. I routed some example pieces on the [[ShopBot]], but since the tenon needs to be machined on the end face of a board, and the ShopBot has a limited z-axis height, the parts that could be made with this would be very limited. In the end I left it as a concept piece. | |longDescription=I thought it would be interesting to have through tenons for a joint that spell out words. To CNC these parts, I needed to optimize the shapes that a router bit would be able to cut for the tenons and the mortises, so I created a [[Font for inside and outside CNCing]]. I routed some example pieces on the [[ShopBot]], but since the tenon needs to be machined on the end face of a board, and the ShopBot has a limited z-axis height, the parts that could be made with this would be very limited. In the end I left it as a concept piece. | ||
|skillSet=Graphic Design | |skillSet=CNC Machining; Graphic Design | ||
|projectType=Personal Project | |projectType=Personal Project | ||
|northForge=True | |northForge=True | ||
}} | }} | ||
{{TD computer|}} get photo of the Integrity Joint display I left in the office before COVID... | |||
{{TD computer|}} get photo of the Integrity Joint | |||
[[Category:ShopBot]] | [[Category:ShopBot]] | ||
Revision as of 18:10, 2021 October 27
| Projects | |
| |
| Project: | Integrity Joint (I) |
| Description: | Through tenons for a joint that spell out words |
| Skillset(s) : | |
| Project Type(s) : | |
I thought it would be interesting to have through tenons for a joint that spell out words. To CNC these parts, I needed to optimize the shapes that a router bit would be able to cut for the tenons and the mortises, so I created a Font for inside and outside CNCing. I routed some example pieces on the ShopBot, but since the tenon needs to be machined on the end face of a board, and the ShopBot has a limited z-axis height, the parts that could be made with this would be very limited. In the end I left it as a concept piece.
|
|