Wake Lamp: Difference between revisions

Latest revision as of 19:51, 2021 October 27

Projects

Project:	Wake Lamp (I)
Description:	Ceiling lamp based on what a resting rowing shell would look like from under water.
Skillset(s) :	3D Modelling • 3D Printing • Arduino • Laser Cutting • Shape Extraction
Project Type(s) :	Personal Project

I reviewed videos and photos to understand what this would actually look like. Then I 3D modelled the belly of a rowing shell and the blades of some oars and 3D printed them. I Laser cut (or rather engraved) the shapes of the waves around the shell and the oars out of a sheet of translucent acrylic. I glued the 3d printed parts on the bottom of the acrylic sheet. Then I built the body of the lamp, and installed RGB LEDs against a randomly reflective background out of crushed up aluminum foil. I then programmed an Arduino to create the appearance of the change of colour and flickering under water in the LEDs.

File:Wake Lamp.mp4, but the camera actually processes against the subtle changes in lighting, so not a very good representation.

@@ Line 1: / Line 1: @@
-A ceiling lamp based on a resting rowing shell from underwater.
+{{Project
+|shortDescription=Ceiling lamp based on what a resting rowing shell would look like from under water.
+|longDescription=I reviewed videos and photos to understand what this would actually look like. Then I [[3D modelled]] the belly of a rowing shell and the blades of some oars and [[3D printed]] them. I [[Laser cut]] (or rather engraved) the shapes of the waves around the shell and the oars out of a sheet of translucent acrylic. I glued the 3d printed parts on the bottom of the acrylic sheet.
+Then I built the body of the lamp, and installed RGB LEDs against a randomly reflective background out of crushed up aluminum foil. I then programmed an [[Arduino]] to create the appearance of the change of colour and flickering under water in the LEDs.
+|skillSet=3D Modelling; 3D Printing; Arduino; Laser Cutting; Shape Extraction
+|projectType=Personal Project
+}}
+* [[File:Wake Lamp.mp4|Here is a video]], but the camera actually processes against the subtle changes in lighting, so not a very good representation.
-== Size ==
+[[Category:Personal Project]]
-" diameter circle-ish; that means 75.4" circumference, ie 1.9m
+[[Category:Arduino]]
-* also see [[#Power Supply size]]
+[[Category:Laser Cutting]]
+[[Category:3D Modelling]]
-== Electronics ==
+[[Category:3D Printing]]
-LEDs and Arduino ordered from adafruit, order 469886, justthis1please!
+[[Category:Rowing]]
-=== Arduino ===
-* [https://www.adafruit.com/products/1315 Arduino Micro w/o headers] - $24.95
-==== Arduino Size ====
-.7" x 1.9" x 0.4" (17.77mm x 49.52mm x 11.59mm)
-=== LEDs ===
-==== white ====
-white colour backlight
-* [https://www.adafruit.com/products/357 warm white LED strip] - $24.95
-** 1.2A/m at full brightness
-==== colour ====
-* http://www.ebay.com/itm/50Pcs-WS2812B-LED-With-Heatsink-10mm-3mm-DC5V-5050-SMD-RGB-WS2811-IC-Built-in-/281270793101?pt=US_Lighting_Parts_and_Accessories&hash=item417d0bb38d
-* 3801-3981-0277-5296
-* same chip, so if we assume same-ish current then 1800mA 60mA/each -> 30ish
-* datasheet: [[https://www.adafruit.com/datasheets/WS2811.pdf]]
-=== Power Supply ===
-W / 120V = 0.83A
-A * 120V= 1200W
-* needed 5V 12V supply, Adafruit doesn't have, ordered
-* 2A for each
-* http://www.ebay.com/itm/12V-5V-AC-Adapter-Hard-Disk-Power-Supply-For-Hard-Disk-Drive-Black-T1K-/380647145774
-* order # 4293-5514-3610-6371
-==== Power Supply size ====
-.7 x 4 x 3cm