Integrity Joint: Difference between revisions

Latest revision as of 19:42, 2021 November 3

Projects

Project:	Integrity Joint (I)
Description:	Through tenons for a joint that spell out words
Skillset(s) :	CNC Machining • Graphic Design
Project Type(s) :	Personal Project

I thought it would be interesting to have through tenons for a joint that spell out words. To CNC these parts, I needed to optimize the shapes that a router bit would be able to cut for the tenons and the mortises, so I created a Font for inside and outside CNCing. I routed some example pieces on the ShopBot, but since the tenon needs to be machined on the end face of a board, and the ShopBot has a limited z-axis height, the parts that could be made with this would be very limited. In the end I left it as a concept piece.

@@ Line 1: / Line 1: @@
-[[Internal:Integrity joint]]
+{{Project
+|shortDescription=Through tenons for a joint that spell out words
+|longDescription=I thought it would be interesting to have through tenons for a joint that spell out words.   To CNC these parts, I needed to optimize the shapes that a router bit would be able to cut for the tenons and the mortises, so I created a [[Font for inside and outside CNCing]]. I routed some example pieces on the [[ShopBot]], but since the tenon needs to be machined on the end face of a board, and the ShopBot has a limited z-axis height, the parts that could be made with this would be very limited.  In the end I left it as a concept piece.
+|skillSet=CNC Machining; Graphic Design
+|projectType=Personal Project
+|northForge=Yes
+}}
-I thought it would be interesting to have through tenons for a joint that spell out words.
-To CNC these parts, I needed to optimize the shapes that a router bit would be able to cut for the tenons and the mortises, so I created a [[Font for inside and outside CNCing]]. I routed some example pieces on the [[ShopBot]], but since the tenon needs to be machined on the end face of a board, and the ShopBot has a limited z-axis height, the parts that could be made with this would be very limited.
-In the end I left it as a concept piece.
-{{TD computer|}} get photo of the Integrity Joint from work.
-[[Category:In-process projects]]
-[[Category:Graphic Design]]]]
 [[Category:ShopBot]]