Laser Cutting: Difference between revisions

Latest revision as of 23:01, 2021 October 8

We have access to several Laser Cutters at North Forge Fabrication Lab. These can cut many materials including acrylic, wood/veneer, paper, cardboard, some rubbers and other plastics. They can also engrave metal.

Click any of the images for more about that project.

MediaWiki kiosk running on a Raspberry Pi 4B
Tabletop training kit for rowing umpires
Custom fit winter cover for the vents in a bumper.
Soap rack custom fit to a sink
Wall mounted floating nightstands
Hat bands with a rower's sillhouette
Custom stand to store shampoo bottles upside down.
Gadget that measures how quickly the user responds to a cue and moves an accelleration sensor.
Ceiling lamp based on what a resting rowing shell would look like from under water.

@@ Line 1: / Line 1: @@
-== cut from Inkscape ==
+{{Skillset | Description=We have access to several [[Laser Cutter]]s at [[North Forge Fabrication Lab]]. These can cut many materials including acrylic, wood/veneer, paper, cardboard, some rubbers and other plastics. They can also engrave metal.
-Engraving/rasters from Inkscape works, but cutting/vectors doesn't work natively. (epilog goes straight to "done")
+}}
+[[Category:North Forge Fabrication Lab]]
-Found a reference somewhere that this has to do with the printer driver subsystem. (reference?)
-To cut an Inkscape design:
-* set stroke style width to 0.001
-* File menu, save-as, pdf
-** check "convert text-to-paths"
-* save
-* open PDF file
-* print as usual
-=== eliminate the "fog" around things ===
-Alexander's calgary flames had a fog around them - why?
-when looking how to print from Inkscape I found some info about this... some people called it a "halo"; didn't find out what the solution is.
-== Materials/Speed/Power settings ==
-* 65/5/500 works for white and brown paper
-** little more oomph, I had to separate some spots manually, but they may have been out of focus
-[[Category: How to]]