Page values for "Integrity Joint"
From Squirrel's Lair
"_pageData" values
1 row is stored for this page| Field | Field type | Value |
|---|---|---|
| _creationDate | Datetime | 2012-11-13 5:51:03 AM |
| _modificationDate | Datetime | 2021-11-04 3:42:24 AM |
| _categories | List of String, delimiter: | | Project • ShopBot |
| _pageID | Integer | 105 |
| _pageName | Page | Integrity Joint |
| _pageTitle | String | Integrity Joint |
| _pageNamespace | Integer | 0 |
"Project" values
1 row is stored for this page| Field | Field type | Value |
|---|---|---|
| shortDescription | Wikitext string | Through tenons for a joint that spell out words |
| longDescription | Wikitext | I thought it would be interesting to have through tenons for a joint that spell out words. To CNC these parts, I needed to optimize the shapes that a router bit would be able to cut for the tenons and the mortises, so I created a Font for inside and outside CNCing. I routed some example pieces on the ShopBot, but since the tenon needs to be machined on the end face of a board, and the ShopBot has a limited z-axis height, the parts that could be made with this would be very limited. In the end I left it as a concept piece. |
| geekery | Wikitext | |
| mainImage | File |  |
| skillSet | List of Page, delimiter: ; | CNC Machining • Graphic Design |
| projectType | List of Page, delimiter: ; | Personal Project |
| northForge | Boolean | Yes |
| randomChangeForce | Boolean |
