File:Saw sharpening file holder.jpg: Difference between revisions

Revision as of 10:18, 2021 October 4

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	09:57, 2021 October 4		2,084 × 2,081 (1.48 MB)	Ttenbergen (talk \| contribs)

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	samsung
Camera model	SM-A715W
Date and time of data generation	16:10, 2021 September 17
Exposure time	79/10,000 sec (0.0079)
F Number	f/1.8
ISO speed rating	32
Lens focal length	5.23 mm
Latitude	49° 51′ 32.77″ N
Altitude	209.296 meters above sea level
Longitude	97° 6′ 46.68″ W
Compression scheme	JPEG (old)
Height	2,084 px
Orientation	Normal
File change date and time	16:10, 2021 September 17
Vertical resolution	72 dpi
Horizontal resolution	72 dpi
Width	4,624 px
Software used	A715WVLU3CUF1
Y and C positioning	Centered
APEX aperture	1.69
Exif version	2.2
Scene type	49
APEX exposure bias	0
Exposure Program	Normal program
Color space	sRGB
Unique image ID	A64QLMD00YM A64QLMD00MA
Maximum land aperture	1.69 APEX (f/1.8)
APEX brightness	4.63
Supported Flashpix version	1
DateTimeOriginal subseconds	087454
White balance	Auto white balance
Exposure mode	Auto exposure
Flash	Flash did not fire
DateTime subseconds	087454
Meaning of each component	63 63 63
Focal length in 35 mm film	24 mm
DateTimeDigitized subseconds	087454
Date and time of digitizing	16:10, 2021 September 17
APEX shutter speed	6.977
Metering mode	Center weighted average
Scene capture type	Standard
Light source	Unknown
Sensing method	Undefined
GPS time (atomic clock)	21:10
GPS date	2021 September 17

Revision as of 09:57, 2021 October 4 (view source) Ttenbergen (talk \| contribs) No edit summary	Revision as of 10:18, 2021 October 4 (view source) Ttenbergen (talk \| contribs) No edit summary Newer edit →
Line 1:	Line 1:
		[[Category:3D Printing]]
		[[Category:3d Modelling]]