Page values for "Dish Glove Rack"
From Squirrel's Lair
"_pageData" values
1 row is stored for this page| Field | Field type | Value |
|---|---|---|
| _creationDate | Datetime | 2013-08-17 1:52:29 AM |
| _modificationDate | Datetime | 2021-12-03 6:12:01 AM |
| _categories | List of String, delimiter: | | Project |
| _pageID | Integer | 190 |
| _pageName | Page | Dish Glove Rack |
| _pageTitle | String | Dish Glove Rack |
| _pageNamespace | Integer | 0 |
"Project" values
1 row is stored for this page| Field | Field type | Value |
|---|---|---|
| shortDescription | Wikitext string | Pipe mounted dish glove rack |
| longDescription | Wikitext | I hate the smell of dish gloves that got wet inside and didn't get a chance to dry because they were just thrown in that cupboard under the sink, where they also look messy. I thought hanging them over the drain pipe might be better, but that's hard to get at and they are still flat so they still don't dry right. So I built a rack that clamps on the horizontal drain pipe that is otherwise just in the way of everything under that sink. This has been installed and working under my sink for several years now. Also see Instructable. |
| geekery | Wikitext | I 3D Modelled and 3D Printed the rack. |
| mainImage | File |  |
| skillSet | List of Page, delimiter: ; | 3D Modelling |
| projectType | List of Page, delimiter: ; | Personal Project |
| northForge | Boolean | Yes |
| randomChangeForce | Boolean |
