Page values for "Clip-in foot stretchers"

From Squirrel's Lair

"_pageData" values

1 row is stored for this page
FieldField typeValue
_creationDateDatetime2012-09-16 2:48:48 AM
_modificationDateDatetime2024-04-10 4:18:43 AM
_categoriesList of String, delimiter: |Project Prototyping and Integration Rowing
_pageIDInteger15
_pageNamePageClip-in foot stretchers
_pageTitleString

Clip-in foot stretchers

_pageNamespaceInteger0

"Project" values

1 row is stored for this page
FieldField typeValue
shortDescriptionWikitext string

SPD standard clip-in foot stretchers for a rowing shell

longDescriptionWikitext

Most racing shells for rowing have built in shoes to keep ones feet in place to control sliding the rolling seat back and forth during the stroke. The fact that they are built in is problematic for several reasons: one must do something with the other shoes one brings, the built in shoes are a large size to accommodate most people, and one usually risks stepping in the duck poop on the dock with ones socks getting in and out of the boat. Since I already have clip-in shoes for my bike, I wanted to use the same system for my rowing shell. I designed and built a mechanism that connects to the built-in foot stretcher mount, but instead mounts bike pedals that the shoes can clip into.

geekeryWikitext

V0.2[edit source]

I cut ends of pedal arms and TIG welded them onto an assembly that fits the foot stretcher. This allows the use of SPD pedals or any other variety of clip-in pedal. Mounting the whole pedal by its built-in stem and bearings eliminates any unexpected forces against the clip-in mechanism. I have had this in my rowing shell since at least 2017 and it works well.

V0.1[edit source]

  • I used the guts from a Wellgo WPD-823 pedal and mounted them on a piece of aluminum. This bracket was mounted solidly, on contrast to a pedal that can rotate, which meant that a clip that was meant to not receive much torquing force was exposed to such force so it eventually broke.

mainImageFile
Clip-in foot stretchers.jpg
skillSetList of Page, delimiter: ;3D Modelling
projectTypeList of Page, delimiter: ;Personal Project Prototyping and Integration
northForgeBoolean
randomChangeForceBoolean