Jump to content

Raspberry Pi: Difference between revisions

From Squirrel's Lair
Ttenbergen (talk | contribs)
Ttenbergen (talk | contribs)
Line 22: Line 22:
*reboot
*reboot
*vncserver :1 -geometry 1024x720 -depth 24
*vncserver :1 -geometry 1024x720 -depth 24
** see [http://www.penguintutor.com/linux/tightvnc] to automate last step...


On PC
On PC

Revision as of 12:21, 2013 December 29

setup

image card

initial settings

  • expand ...

setup wireless networking

  • sudo nano \etc\network\interfaces

connect

  • see assigned IP address during Pi boot
  • using Putty
  • ssh pi@192.168.2.X

run updates

  • sudo apt-get update

setup VNC[1]

  • sudo apt-get install tightvncserver
  • tightvncserver
  • reboot
  • vncserver :1 -geometry 1024x720 -depth 24
    • see [2] to automate last step...

On PC

  • install TightVNC [3]
  • connect to 192.168.0.1**:1

other links