Laser Cutting: Difference between revisions
Ttenbergen (talk | contribs) No edit summary |
Ttenbergen (talk | contribs) |
||
| Line 6: | Line 6: | ||
To cut an Inkscape design: | To cut an Inkscape design: | ||
* set stroke style width to 0.001 | * set stroke style width to 0.001 | ||
** .001 what? pixels can't be smaller than about .01 to still be seen | |||
* File menu, save-as, pdf | * File menu, save-as, pdf | ||
** check "convert text-to-paths" | ** check "convert text-to-paths" | ||
Revision as of 12:44, 2012 October 23
cut from Inkscape
Engraving/rasters from Inkscape works, but cutting/vectors doesn't work natively. (epilog goes straight to "done")
Found a reference somewhere that this has to do with the printer driver subsystem. (reference?)
To cut an Inkscape design:
- set stroke style width to 0.001
- .001 what? pixels can't be smaller than about .01 to still be seen
- File menu, save-as, pdf
- check "convert text-to-paths"
- save
- open PDF file
- print as usual
eliminate the "fog" around things
Alexander's calgary flames had a fog around them - why? when looking how to print from Inkscape I found some info about this... some people called it a "halo"; didn't find out what the solution is.
Materials/Speed/Power settings
- 65/5/500 works for white and brown paper
- little more oomph, I had to separate some spots manually, but they may have been out of focus