File:Veneer cut line test.jpg: Difference between revisions

Revision as of 14:59, 2019 January 20

Test patch of mahogany veneer inlaid into oak or ash.

10mmx10mm decrement by .1mm each square recesses, inlays all 10mm.

Click on a date/time to view the file as it appeared at that time.

	Date/Time	Thumbnail	Dimensions	User	Comment
current	13:44, 2012 November 12		1,987 × 533 (362 KB)	Ttenbergen (talk \| contribs)	Test patch of mahogany veneer inlaid into oak or ash. 10mmx10mm decrement by .1mm each square recesses, inlays all 10mm.

You cannot overwrite this file.

The following page uses this file:

This file contains additional information, probably added from the digital camera or scanner used to create or digitize it.

If the file has been modified from its original state, some details may not fully reflect the modified file.

Camera manufacturer	Canon
Camera model	Canon PowerShot A410
Exposure time	1/10 sec (0.1)
F Number	f/2.8
Date and time of data generation	00:01, 1980 January 1
Lens focal length	5.4 mm
Orientation	Normal
Horizontal resolution	180 dpi
Vertical resolution	180 dpi
File change date and time	00:01, 1980 January 1
Y and C positioning	Centered
Exif version	2.2
Date and time of digitizing	00:01, 1980 January 1
Meaning of each component	Y Cb Cr does not exist
Image compression mode	3
APEX shutter speed	3.3125
APEX aperture	2.96875
APEX exposure bias	0
Maximum land aperture	2.96875 APEX (f/2.8)
Metering mode	Pattern
Flash	Flash did not fire, compulsory flash suppression
Supported Flashpix version	1
Color space	sRGB
Focal plane X resolution	11,441.340782123
Focal plane Y resolution	11,377.777777778
Focal plane resolution unit	inches
Sensing method	One-chip color area sensor
File source	Digital still camera
Custom image processing	Normal process
Exposure mode	Auto exposure
White balance	Auto white balance
Digital zoom ratio	1
Scene capture type	Standard

@@ Line 2: / Line 2: @@
 mmx10mm decrement by .1mm each square recesses, inlays all 10mm.
+[[Category:Laser cutting]]
+[[Category:Veneer]]