Raspberry Pi: Difference between revisions
Ttenbergen (talk | contribs) |
Ttenbergen (talk | contribs) |
||
| Line 24: | Line 24: | ||
==== start ==== | ==== start ==== | ||
* vncserver :1 -geometry 1024x720 -depth 24 | * ''' manually: ''' vncserver :1 -geometry 1024x720 -depth 24 | ||
* see [http://www.penguintutor.com/linux/tightvnc] | * automatically (see [http://www.penguintutor.com/linux/tightvnc] and [http://learn.adafruit.com/adafruit-raspberry-pi-lesson-7-remote-control-with-vnc/running-vncserver-at-startup] | ||
): | |||
** cd /home/pi | |||
** cd .config | |||
** mkdir autostart | |||
** cd autostart | |||
** nano tightvnc.desktop | |||
[Desktop Entry] | |||
Type=Application | |||
Name=TightVNC | |||
Exec=vncserver :1 | |||
StartupNotify=false | |||
** close and save (ctrl-X and then Y) | |||
==== Connecting from PC ==== | ==== Connecting from PC ==== | ||
Revision as of 12:33, 2014 January 1
setup
image card
initial settings
- expand ...
setup wireless networking
- sudo nano \etc\network\interfaces
connect
- see assigned IP address during Pi boot
- using Putty
- ssh pi@192.168.2.X
run updates
- sudo apt-get update
setup VNC[1]
setup
- sudo apt-get install tightvncserver
- tightvncserver
- reboot
start
):
- cd /home/pi
- cd .config
- mkdir autostart
- cd autostart
- nano tightvnc.desktop
[Desktop Entry] Type=Application Name=TightVNC Exec=vncserver :1 StartupNotify=false
- close and save (ctrl-X and then Y)
Connecting from PC
- install TightVNC [4]
- connect to 192.168.0.1**:1