Raspberry Pi: Difference between revisions
Ttenbergen (talk | contribs) No edit summary |
Ttenbergen (talk | contribs) m →setup |
||
| (One intermediate revision by the same user not shown) | |||
| Line 3: | Line 3: | ||
== setup == | == setup == | ||
'' to get back into this later: sudo raspi-config | '' to get back into this later: sudo raspi-config | ||
* Get imager from | * Get imager from [https://www.raspberrypi.org/downloads/ here] | ||
* Image card | * Image card | ||
| Line 15: | Line 15: | ||
=== connect === | === connect === | ||
*see assigned IP address during Pi boot | *see assigned IP address during Pi boot | ||
*using | *using Putty | ||
* ssh pi@192.168.2.X | * ssh pi@192.168.2.X | ||
Latest revision as of 07:07, 2024 September 16
See also: Internal:Raspberry Pi Pico
setup
to get back into this later: sudo raspi-config
- Get imager from here
- Image card
initial settings
- expand ...
setup wireless networking
- sudo nano \etc\network\interfaces
connect
- see assigned IP address during Pi boot
- using Putty
- ssh pi@192.168.2.X
setup VNC[1]
setup
- sudo apt-get install tightvncserver
- tightvncserver
- reboot
run updates
- sudo ### apt-get ### update
setup VNC[2]
setup
- sudo ### apt-get ### install tightvncserver
- tightvncserver
- reboot
start
manually: vncserver :1 -geometry 1024x720 -depth 24
automatically (see [3] and [4]):
- cd /home/pi
- cd .config
- mkdir autostart
- cd autostart
- nano tightvnc.desktop
[Desktop Entry] Type=Application Name=TightVNC Exec=vncserver :1 StartupNotify=false
- close and save (ctrl-X...)
Connecting from PC
- install TightVNC [5]
- connect to 192.168.0.1**:1