Edit Project: Custom Acrylic Soap Rack

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

Short Description:
Long Description:	I wanted soap rack that fit properly on my bathroom sink to save space and look clean. I took an image of the sink with a reference item, did a [[Shape Extraction]], [[Graphic Design\|graphic designed]] a rack that fits the space and [[laser cut]] it out of acrylic.
How we did it / geekery:
Skill Set:
Project Type:
North Forge Fabrication Lab:

Free text[edit | edit source]

== V2 == The current version is out of 1/4" white acrylic, cut in two pieces and glued together. The design was improved to use wider slots to dry off better; the thicker material helps with this as well. == V1 == The first version lasted for >5yrs. It was cut out of 1/8" clear acrylic. That thickness turned out to not be strong enough, and the clear acrylic always looked dirty. Also, the slots were too close together for the spaces between to dry, so the soap didn't stay as dry as needed. [[File:Custom Acrylic Soap Rack pre assembly.jpg|300px]] [[Category:Personal Project]] [[Category:Laser Cutting]] [[Category:Graphic Design]]

Summary:

Cancel